R-20 Corrosion Disolver 1LT,5LT,20LT

corrosion_disolver

R20 Corrosion Dissolver / Radiator Flush has been developed to dissolve corrosion in two different applications.

R20 can be used as a bath with 1 part R20 to 5 parts water (in Plastic Bucket) Simply place corroded parts in the bath for between 3-24 hours. The corrosion is dissolved revealing only the base metal, which can then be prepared for painting.

R20 has the ability to reach confined areas where blasting cannot reach.

R20 is biodegradable and environmentally safe so can therefore be disposed of safely.

R20 saves time by allowing the parts to be left overnight and worked with the following day without the need for the dangerous, labour intensive traditional methods of acid baths and sand blasting.

R20 will not harm glass, rubber, plastic and will only remove paint where corrosion exists beneath the paint.

R20 enables otherwise unusable tools to be recycled and used again.

R20 can be used to unblock radiators while you keep working. Dilute 1 part R20 to 5 Parts water. R20 has been formulated with special inhibitors, which allow the product to be circulated in the engine cooling system for 7 days without affecting the base metals in the radiator and engine block. Allow the product to work for at least 12 hours then simply drain contents rinse thoroughly and fill with manufacturer approved coolant.

R20 is suitable for all metals except zinc.
Parts placed in the bath should be properly de-greased, as R20 will not penetrate grease.

R20 is reusable and should be stored in a sealed plastic container to maximise its usable life. From time to time (depending on use) the bath can be replenished by adding more R20.